Audiotone Professional Active Crossovers for Precision Sound

In professional sound reinforcement, clarity is everything. Look at it this way: forcing a delicate tweeter to choke on a heavy bassline is just bad engineering. That is exactly why Audiotone Professional Crossovers exist. They split your audio signal with absolute precision before it ever hits your amplifiers. By channeling the right frequencies—lows, mids, and highs—to their rightful drivers, these active electronic crossovers crush distortion and squeeze every ounce of efficiency out of your system. Think of it as giving your gear some much-needed breathing room. Specifically built for sound engineers, DJs, and live event organizers across India, our network crossovers keep your sound crisp, punchy, and perfectly balanced. You get total control over the mix, pure and simple. Whether you are running a heavy bass DJ setup or a pristine live vocal concert, dropping an electronic audio crossover into your rack ensures your speakers hit their peak without overlapping into a muddy mess.

Why Choose Audiotone Crossovers

Our active sound frequencies splitters, like the AD-201DISI, feature a tough 19″ x 1.73″ x 6.1″ (483x44x155mm) rack-mountable chassis that slides effortlessly into standard flight cases. No awkward squeezing, no frantic re-rigging minutes before soundcheck. Plus, at just 2.1kg (4.2 lbs), they offer a lightweight yet rugged solution for both touring rigs and permanent installations.

How does it actually talk to the rest of your gear, though? Armed with Unbalanced 1/4″ TRS Jack inputs (44k Ω impedance) and Unbalanced 1/4″ TRS Jack outputs (300Ω impedance), these units plug right into standard mixers and power amps. You can leave the bucket of weird adapters at home. With a massive frequency response spanning from 20Hz to 22Khz, Audiotone crossovers capture everything from a chest-thumping sub-bass to the highest, crispest frequencies. No details get left behind. 

Key Benefits

• Ultra-Low Distortion: A tiny maximum input ratio of 0.0035% guarantees immaculate signal transparency without adding unwanted hiss or hum.
• Full-Range Fidelity: The expansive frequency response spanning from 20Hz to 22Khz seamlessly feeds everything from deep subwoofers to high-frequency compression drivers.
• Pro-Grade Headroom: A maximum input level of +21dB takes hot signals from high-end mixing boards like a champ without clipping.
• Tour-Ready Protection: Includes a rugged fuse system (1.0A/115V; 0.5A/250V; 5mm glass type) to shield your gear from nasty voltage spikes.
• Standard Rack Fit: The slim 1U profile means effortless integration into any touring rack or studio setup.

Product Use Cases

• Live Concerts & Stage Shows: Separates vocal mids from instrument highs and low-end drums to keep the front-of-house mix crystal clear.
• Club and Lounge Installations: Perfect for multi-speaker setups where subs and tops need distinct frequency feeds to handle continuous, high-SPL playback.
• Mobile DJ Rigs: Squeezes maximum punch out of bass bins while keeping vocal lines on the top speakers perfectly defined.
• Auditoriums & Houses of Worship: Polishes speech intelligibility by cutting out the muddy low-end from column speakers and line arrays.

Buying Guide Section

When shopping for an active crossover to anchor your sound system, keep these non-negotiables in mind:

• I/O Connectivity- Check your current setup and match your connections. Choosing units built with Unbalanced 1/4″ TRS Jack inputs and Unbalanced 1/4″ TRS Jack outputs gives you universal compatibility with the vast majority of live sound gear across India.
• Total Harmonic Distortion (THD)- Always hunt for low distortion ratings (under 0.01%). You want a clean split, not a unit that colors or degrades your audio signal.
• Form Factor & Weight- If you run a mobile rig, prioritize compact 1U rack dimensions and lightweight builds (around 2kg). Your back will thank you when you are loading a truck at 3 AM.
• Power Protection– Indian power grids can be wildly unpredictable. Make sure your unit features a dedicated glass fuse to save your internal circuitry from sudden, unexpected spikes. It is the cheapest insurance policy you can buy for your expensive sound system.

FAQ Section

Q1: What does an active crossover do in a sound system? 

An active crossover splits an audio signal into specific frequency bands (low, mid, high) before sending it to the amplifiers, ensuring each speaker only plays the sounds it was designed for.

Q2: What are the input and output types on the Audiotone AD-201DISI? 

The unit features Unbalanced 1/4″ TRS Jack inputs with a 44k Ω impedance and Unbalanced 1/4″ TRS Jack outputs with a 300Ω impedance.

Q3: Can this crossover handle high-output mixing consoles? 

Yes, with a maximum input level of +21dB, it comfortably processes high-level signals from pro audio mixers without distortion.

Q4: Does this unit fit into a standard audio rack? 

Yes, its dimensions are 19″ x 1.73″ x 6.1″ (483x44x155mm), making it a perfect 1U fit for standard studio and live sound racks.

Q5: What type of fuse does this active crossover use?

It utilizes a 5mm glass type fuse rated at 1.0A/115V or 0.5A/250V to protect the internal electronics from power surges.

Conclusion

Ready to take your sound clarity to the next level? Eliminate muddy mixes and protect your speakers from damaging frequencies. Explore our premium range of Audiotone Professional Active Crossovers today, find the perfect match for your amplifiers, and experience balanced, high-fidelity sound like never befor